Spesifikasi

Convertor

• Principle Transit- time ultrasonic flowmeter
• Accuracy ±1%
• Operation: 4 keyboards operation
• SignalOutput: – 1 way 4~ 20mA output, electric resistance 0~ 1K，accuracy0. 1% – 1 way OCT pulse output（ Pulse width 6~ 1000ms，default is 200ms） – 1 way Relay output
• Signal Input: – 3 way 4~ 20mA input, accuracy 0. 1%，acquisition signal such as temperature, press and liquid level. – Connect the temperature transducer Pt100, can finish the heat/energy measurement.
• Data Interface: Insulate Rs485 serial interface, upgrade the flowmeter software by computer, support the MODBUS.

Pipe Installation Condition

• Pipe Material: Steel, Stainless steel, Cast iron, Copper, Cement pipe, PVC, Aluminum, Glass steel product, liner is allowed.
• Pipe Diameter: 15~ 6000mm
• Straight Pipe: Transducer installation should be satisfied: upstream10D, downstream 5D, 30D from the pump.

Measuring Medium

• Type of Liquid: Single liquid can transmit sound wave, such as Water (hot water, chilled water, city water, sea water, waste water, etc.); Sewage with small particle content; Oil ( crude oil, lubricating oil, diesel oil, fuel oil, etc. ) ; Chemicals ( alcohol, etc. ) ; Plant effluent; Beverage; Ultra- pure liquids, etc.
• Temperature: – 30~ 160℃
• Turbidity: No more than 10000ppm and less bubble
• Flowrate: 0~±7m/ s

Working Environment

• Temperature: Convertor：- 20~ 60℃；Flow Transducer：- 30~ 160℃
• Humidity: Convertor: 85% RH；Flow Transducer：can measure under water, water depth≤2m（tansducer sealed glue）

Power Supply: DC8~36V or AC10~30V Power consumption: 1. 5W Dimension: 95*95*35MM(Convertor)